Post for all Platform

People rarely focus on regular roof inspections, and this ignorance can have serious causes, repented later. One of the most common results of faulty roofs is water leakage, leading to flooded basements. Regular roof inspections, avoid such adversity and make the roof capable to endure harsh weather.


We’ve put together a quick roof maintenance checklist, to identify and prevent the damage that spells doom for an average roof.


1) Clean-out Gutters:

One of the most essential parts, of any roof inspection, is cleaning the gutters to maintain a moral condition of the roof. Clogged gutter, allow water to seep inside the structure. It is thus advisable, to clean out gutters, biannually. Gutter guard can help in case of excessive build-up of leaves and debris. Loose gravel from asphalt shingles in the gutter is a signal of wearing off the roof.



2) Trim the trees hanging over the roof:

Enormous trees can add to the beauty of any property but pose a high risk of damage. The shedding leaves can fill-up the gutters more often. This results in moisture trapped underneath. Overhanging limbs have chances of breaking out and fall onto the roof. The best way to prevent any such damage is through regular trimming of overhanging branches.



3) Standing water on a flat roof:

Flat roof is known for its commercial benefits and is comparatively cheaper. One can find it commonly in Melbourne, Australia. Pooling water on such roofs can drip into the building. A Sizable amount of static water can compromise the roof.


Get professional help for roof restoration in Melbourne, in case of severe leaks.


4) Insulate the attic:

The right amount of insulation in the attic helps improve the life of the roof. Some other benefits are reduced heat transfer and protect the roof rafters from extreme contraction and expansion. Professionals in this field can determine the right amount of insulation.


5) Check for cracks in the tile roofing system:

Although tile roofing lasts longer compared to shingle roofing, regular checks are still necessary. Cracks in the roof may be early signs of need for roof restoration or repairs. Conduct checks through virtual inspection. Further, check for the integrity of the roof membrane. It can raise questions on the overall health of the roof.


6) Inspect for rust:

Metal roofs are a common form of roofing solution in Australia. This is because of its longevity and strength. With these roofs, there are high chances of corrosion/rust. In case rust develops on these roofs, we can easily remove it through wire-brush. This will help remove rust, follow it by prime and finally paint the affected areas. By doing so, the roof stays healthy for a lengthy period.


7) Get rid of moss, mould or algae:

Moss, mould or algae have water retention capability. Because of this, the development of moss can lead to sagging roofs. It might not look problematic on the outside. However, it can cause a lot of damage in the long run. The best way to deal with this is to use a little chlorine bleach or detergent mixed with water. Clean the affected areas with this solution.


These were some easy self-maintenance steps for roof maintenance. In case of severe damage, consider professional help for roof repairs in Melbourne.

Leave a Reply

Your email address will not be published. Required fields are marked *