Metal forming pliers are one of the most important instruments in orthodontics. Whether you use wire forming pliers or bending ones, they come handy in managing all the cases.
Pliers are basically used for bending the materials.
By the use of pliers, you can give the desired shape to the wire, etc. Various kinds of forming pliers are used in orthodontics, which helps to bend the wires as needed.
The pliers can be used for a variety of specific tasks, including arch-wire work like loop forming and contouring, as well as torqueing and placing stops in the arch-wire.
The pliers are mostly made of stainless steel. It enhances their effectivity and prevents them from rust. It also makes them durable and long-lasting.
The materials used to make pliers consist mainly of steel alloys with additives such as vanadium or chromium, to improve strength and prevent corrosion.
The metal handles of pliers are often fitted with grips of other materials to ensure better handling; grips are usually insulated and additionally protect against electric shock.
The jaws vary widely in size, from delicate needle-nose pliers to heavy jaws capable of exerting much pressure, and shape, from basic flat jaws to various specialized and often asymmetrical jaw configurations for specific manipulations.
The surfaces are typically textured rather than smooth, to minimize slipping.
The basic design of pliers has changed little since their origins, with the pair of handles, the pivot (often formed by a rivet), and the head section with the gripping jaws or cutting edges forming the three elements.
A plier-like tool designed for cutting wires is often called diagonal pliers.
Some pliers for electrical work are fitted with wire-cutter blades either built into the jaws or on the handles just below the pivot.
Where it is necessary to avoid scratching or damaging the workpiece, as for example in jewelry and musical instrument repair, pliers with a layer of softer material such as aluminum, brass, or plastic over the jaws are used.
Points to Consider Before Purchasing
The minimum requirement for pliers and relatable to the rest of the orthodontics instrumental is that they are made of high-grade stainless steel, required by law to ensure the right sterilization and corrosion resistance.
However, given the particularity of treatment and handling, they require greater resistance to survive the constant stress of bending and cutting wires avoiding to suffer wear or deformation in the edge and active part.
Metal Forming Pliers (Set of 4)
One of the most used sets of instruments in orthodontics, they are used for many purposes. They are used to make loops, rings, S, C, Z, L and just about any other shape. They are best suited for forming different shapes, loops, and clasps as they provide maximum strength.
They can bend strip stock up to 1/32-inch-thick and wire up to 3/32 inch.
They are made of polished stainless steel with box joints that keep jaws in alignment.